Table of Contents
Advertisement
SBI-7428R-C3 Blade Module User's Manual
Table 6-5. Chipset Configuration Sub-menu (Continued)
Menu Option
PCI-E Port L1 Exit
Latency
Fatal Err Over
Non-Fatal Err Over
Corr Err Over
LOs Support
IIO1 Configuration
IOU2 (IIO PCIe
Port 1)
IOU0 (IIO PCIe
Port 2)
IOU1 (IIO PCIe
Port 3)
No PCIe Port
Active ECO
IOAT Configuration
Enable IOAT
No Snoop
Relaxed Ordering
Intel VT for Directed
I/O (VT-d)
Intel VT for
Directed I/O (VT-d)
Interrupt
Remapping
QPI Configuration
QPI General
Configuration
QPI Status
Description
This setting allows you to specify the length of time this port requires
to complete transition from L1 to L0. The options include <1uS, 1uS -
2uS, 2uS - 4uS, 4uS - 8uS, 8uS - 16uS, 16uS - 32uS, 32uS - 64uS
and >64uS.
This setting enables you to force fatal error propogation to the IIO
core error logic for this port. Options include Enable and Disable.
This setting enables you to force fnon-fatal error propogation to the
IIO core error logic for this port. Options include Enable and Disable.
This setting enables you to force correctable error propogation to the
IIO core error logic for this port. Options include Enable and Disable.
When this setting is Disabled, the IIO never puts its transmitter in the
Los state.
This sub-menu configures Integrated I/O 1 Configuration.
This setting selects the PCIe port bifurcation for PCIe Slot 1. Options
include x4x4, x8 or Auto.
This setting selects the PCIe port bifurcation for PCIe Slot 2. Options
include x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16 or Auto.
This setting selects the PCIe port bifurcation for PCIe Slot 3. Options
include x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16 or Auto.
This setting is a workaround setting when no PCIe port is active.
Options include PCU Squelch Exit Ignore Option and Reset the
SQ FLOP by CSR Option.
This sub-menu configures all IOAT configuration options.
This setting allows you Enable or Disable IOAT devices.
Use this setting to Enable or Disable No Snoop for each CB device.
This setting Enables or Disables relaxed ordering in your system.
This sub-menu allows you to configure Intel VT for Directed I/O
settings.
This setting allows you to Enable or Disable Intel Virtualization
Technology for Directed I/O (VT-d) by reporting the I/O device
assignment to VMM through the DMAR ACPI Tables.
This setting allows you to Enable or Disable VT_D Interrupt
Remapping Support.
This sub-menu allows you to configure QPI settings.
This sub-menu displays and provides options to change the QPI
General settings.
Selecting this sub-menu brings up a screen showing QPI Status
static information including Number of CPU, Number of IIO, Current
QPI Link Speed, Current QPI Link Frequency, QPI Global MMIO Low
Base / Limit, QPI Global MMIO High Base / Limit and QPI Pci-e
Configuration Base / Size.
6-10
Advertisement
Table of Contents
