Table of Contents
Advertisement
About this Manual
This manual is written for professional system integrators, Information Technology
professionals, service personnel and technicians. It provides information for the
installation and use of Supermicro's SBI-7428R-C3/C3N blade module. Installation and
maintenance should be performed by experienced professionals only.
The only difference between the SBI-7428R-C3 and SBI-7428R-C3N blade modules is
that the SBI-7428R-C3N supports NVMe drives and the SBI-7428R-C3 does not.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
SBI-7428R-C3/C3N blade module and describes their main features.
Chapter 2: Standardized Warning Statements
You should familiarize yourself with this chapter for a general overview of safety
precautions that should be followed when installing and servicing SBI-7428R-C3/C3N
blade module.
Chapter 3: Setup and Installation
Refer to this chapter for details on installing the SBI-7428R-C3/C3N blade module into
®
the SuperBlade
chassis. Other sections cover the installation and placement of
memory modules and the installation of hard disk drives into the blade module.
Chapter 4: Blade Module Features
This chapter coves features and component information about SBI-7428R-C3/C3N
blade module. Included here are descriptions and information for serverboard
components, connectors, LEDs and other features of the blade module.
Chapter 5: RAID Setup Procedure
RAID setup and operations for SBI-7428R-C3/C3N blade module are covered in this
chapter.
Chapter 6: BIOS
BIOS setup is covered in this chapter for SBI-7428R-C3/C3N blade module.
Appendix A: BIOS POST Codes
BIOS POST Codes for SBI-7428R-C3/C3N blade module are explained in this
appendix.
Preface
iii
Advertisement
Table of Contents
