Inspur NF5888M5 User Manual page 65

Set the wait time to cancel PXE boot after pressing ESC key, the setting
PXE boot wait time
range is 0~5.
Media detect count Device detect count settings, the setting range is 1~50.
8.2.2.7 CSM configuration
CSM Configuration interface is used to set the options related with the compatibility support
module.
CSM Configuration Interface Instruction Table
Interface Parameters
CSM Support
GateA20 Active
INT19 Trap Response
Boot Mode
Network
Fig. 3.11
Function Description
CSM support on-off settings. Options include:
Enabled
Disabled
A20 line control mode settings. Options include:
Upon Request
Always
A20 is an address line, which controls the system how
to access the memory space larger than 1MB.
Interrupt/Capture signal response settings. Options
include:
Immediate
Postponed
Boot mode settings. Options include:
UEFI Mode
Legacy Mode
NIC Option ROM execution mode settings. Options
include:
Do not launch
Legacy
UEFI
BIOS setup
0
1
Default Value
Disabled
Upon Request
Immediate
UEFI Mode
UEFI
59