3.5
Mask Disk as Spare menu. After entering Mask Disk as Spare menu, system will display
the disks not in RAID volume. Please use the space key to select the disks according to the
actual demand, and then press Enter. The system will prompt "Are you sure you want to
mask selected disks as Spare? (Y/N)", enter "Y" or "N" according to the prompt. It is to be
noted that all data on this disk will be lost as the spare disk.
3.6
Exit menu. Select Exit menu through up and down keys, or press ESC to exit SATA RAID
configuration interface, as shown in the following figure. The system will prompt "Are you
sure you want to exit? (Y/N)", enter "Y" to exit, or enter "N" to cancel the exit operation.
44
Fig. 2.18
Fig. 2.19