Snorkel SL26RTE Parts & Service Manual page 7

INTRODUCTION
PURPOSE
The purpose of this service and parts manual is to provide instructions and illustrations for
the operation and maintenance of this work platform manufactured by Snorkel.
SCOPE
The manual includes procedures for proper operation, maintenance, adjustment and repair
of this product as well as recommended maintenance schedules and troubleshooting.
GENERAL DESCRIPTION
The work platform consists of the platform, controller, elevating assembly, power module,
control module and chassis.
PLATFORM
The platform has a reinforced steel floor, 1.1 m (43.5 inches) high guardrails with a mid rail,
152 mm (6 inches) toe boards and an entry gate at the rear of the platform. The guardrails
can be folded down for transportation purposes.
Features of the SL26/SL30ERT is shown in Figure 1-1.
1. Platform
2. Platform controller assembly
3. Elevating assembly
4. Power module
5. Control module
6. Chassis
INTRODUCTION
! W A R N I N G
DO NOT use the work platform without guardrails properly assembled and
in place.
Figure 1-1: Work platform
!
2
3
6
5
1
4
Page 1 - 1