Section 6: Service - JETStream PI-123 Product Instructions

Section 6: Service

Figure A
NOTE: See Appendix B for list of PNs and accessories.
6.0 TUBE SPINNING NOZZLE MAINTENANCE
When not in use, store nozzle in a dry place. If nozzle is to be stored more
than a few days, disassemble and apply WD-40® or other penetrating oil
to nozzle body and sleeve. Reassemble Tube Spinning Nozzle per installa-
tion instructions.
See YouTube channel for videos on various Jetstream products.
WARNING W W
Remove the nozzle from service if:
a) The body, sleeve, or front nozzle shows signs of cracking or other
damage.
b) The wall thickness of these parts is reduced by 25% at any point.
c) The nozzle can no longer hold pressure at water flow rate for which it
was sized.
20
Sleeve
Nozzle
PI-123
Body
May 2017