JETStream PI-123 Product Instructions page 19

• DO NOT operate the Tube Spinning Nozzle above specified pressure
rating.
• When used on a flex lance and in a tube much larger than the nozzle
diameter, the Tube Spinning Nozzle must be used with a stinger to
prevent
the nozzle from "doubling back" for operator safety.
• Operator must wear ear protection due to the noise generated by the
spinning nozzle.
• Never stand in the plane of blasting.
• A Lance Safety Grip is recommended to minimize the risk of a live
nozzle exiting the tube unexpectedly back at the lance operator.
• At high-pressure, the water can be hot. Wear gloves and use
precaution to prevent scalding.
• DO NOT use Teflon tape on 22K PSI connections.
• DO NOT over tighten connections to prevent sealing surface damage.
• Place barricades with warning signs or barricade tape around work
area. This includes the waterblast unit and all high-pressure hoses.
• Operator must be outfitted with proper safety apparel (refer to yellow
JETSTREAM SAFETY WARNING pamphlet). Body armor is strongly
recommended.
May 2017 PI-123 19