Operating The Modi Belt Box Timer, Manual Mode - RADEMACHER Modi 2650 Installation And Instruction Manual

i

Operating the Modi Belt Box Timer, manual mode

Manual operation with the operating buttons
You can operate the Modi Belt Box Timer at any time with the UP (▲) or DOWN (▼)
operating buttons.
Manual operation is possible in any operating mode and has priority over
i
the automatic functions.
Switching between normal and jog mode
You can operate the Modi Belt Box Timer in normal mode (factory setting) or in jog
mode. To do this, you must switch the slide switch behind the front panel before
commissioning for the first time.
After making the switch, you must carry out a software reset (see page
i
32) each time so that the selected operating mode is effective.
Normal mode
The roller shutter moves to the respective end position after pressing an operating
button.
Jog mode
The roller shutter only moves to the desired direction while the respective operating
button is pressed, see page 30.
A slide switch behind the front panel is used to switch between
normal and jog mode. Carefully pry off the front panel on the
device and slide the switch to the desired position.
Switch position:
Slide switch on the left
Slide switch on the right = jog mode
= normal mode
between normal and jog mode
Switch
EN
29