RADEMACHER Modi 2650 Installation And Instruction Manual page 16

i
Installation
Fastening and connecting the light sensor
You must use a light sensor for brightness-dependent control of the Modi Belt Box
Timer (automatic sun / dusk function).
Secure the light sensor to the
window pane using the suction cup.
It measures the current brightness
there. Then insert the connector of
the light sensor into the existing con-
nection on the bottom of the Modi
Belt Box Timer.
Automatic sun function
Select the position of the light sensor
as the position to which your roller
shutter should be lowered if the set
limit (too much sun) is exceeded.
Automatic dusk function
The position of the light sensor is
freely configurable. You can keep the
position of the light sensor selected
for the automatic sun function.
Avoid damaging the light sensor and
the sensor cable.
◆ Release the light sensor from the
window by pulling on the grip on
the suction cup.
◆ Never pull on the sensor cable.
◆ Never severely bend or kink the
sensor cable.
16
ATTENTION!
EN