RADEMACHER Modi 2650 Installation And Instruction Manual page 13

i
Electrical connection
Safety instructions for the electrical connection
There is a risk of fatal electric shock in case of direct contact with connecting
terminals or if connecting cables come into contact with a metallic belt box.
◆ Carry out all installation and connection work in an isolated and de-energised
state.
◆ Disconnect all phases of the mains power lead and secure it to prevent any
reconnection.
◆ Check that the system is de-energised.
◆ Strip the leads of the connecting cable so that the live leads do not protrude from
the connecting terminals or the protective cover.
◆ Install the enclosed protective cover before switching on the power supply, see
figure.
Incorrect wiring may lead to short circuits and destroy the device.
◆ Observe the connector pin assignments in the connection diagram on page 14.
◆ Follow all the electrical connection specifications in the operating manual of your
tubular motor.
DANGER!
WARNING! WARNING!
EN
13