Week Programme - RADEMACHER Modi 2650 Installation And Instruction Manual

i

Week programme

Week programme input mode
If you want to set separate opening and closing times for each day of the week, you
must activate the week programme input mode.
You can also set two switching times, which will apply in addition to the daily settings
on all days of the week.
Activating the week programme input mode
1.
+ SET
1
7
Setting the current day
2.
SET
Setting the daily switching times
To allow you to set the desired switching times for each day of the week, the pro-
gramme starts again on Monday after pressing the week button again.
When the week programme is activated, the opening and closing times
i
of the standard programme are applied.
The configuration or correction of the opening and closing times for each
day of the week is done in the same way as the configuration of the
standard times.
The configured day of the week
and the clock symbol appear
on the display.
Press the button...
until the current day of the week (e.g.
Wednesday [ MI ]) appears on the
display, thus saving the setting.
EN
MO
:
So
AUTO
▲ ▼
The configured oper-
ating mode is also dis-
played.
MO DI MI
:
So
AUTO
▲ ▼
21