20.2 Menu 9.8.2 - Setting the display contrast
1.
2.
20.3 Menu 9.8.4 - Setting the timer mode
This menu enables you to configure the time base for the internal timer
(depending on the local power supply).
1.
2.
Open menu 9.8.2.
Set and confirm the desired contrast.
1 = low contrast
10 = high contrast
Open menu 9.8.4.
Set and confirm the desired timer
mode.
1 = 50 Hz operation (factory setting)
e.g. in Europe
2 = 60 Hz operation
e.g. in the USA
3 = Quartz timer
for other mains frequencies
EN
49