Setting The Automatic Dusk Function - RADEMACHER Modi 2650 Installation And Instruction Manual

i

Setting the automatic dusk function

Switching the automatic dusk function on / off
1.
Pay attention to the display:
MANU
AUTO
Please note the state of the moon symbol on the standard display:
OFF
ON
FLASHING
Observe the cut-off time for the reactivation of the automatic dusk function
If your roller shutter has been closed by the automatic dusk function and then
opened again with a manual movement command, the automatic dusk function will
only be active again after approximately 1 hour.
Description of the display
Press
and within 2 seconds...
Press again until...
the display changes from MANU to
AUTO or from AUTO to MANU .
Automatic dusk function is switched off
Automatic dusk function is switched on
Automatic dusk function is switched off
Automatic dusk function is switched on
Automatic dusk function is active
EN
5: 5:
▲▼ AUTO MANU
5: 5:
AUTO MANU
▲▼
Configured set limit
5: 5:
AUTO MANU
▲▼
Currently measured
dusk value (0-29).
As the dusk increases,
the measured value
increases.
Very dark = 29
Bright = 0
Wi
So
Wi
So
Wi
So
27