Installation - RADEMACHER Modi 2650 Installation And Instruction Manual

i

Installation

Carefully pry off the front panel and then slide the Modi Belt Box Timer into
1.
the belt box.
A damaged connecting cable may cause a short circuit.
◆ Ensure that the connecting cable is laid safely.
◆ The connecting cable may not be pinched when screwing on the Modi Belt Box
Timer as this could lead to damage.
Then screw the housing to the
2.
belt box with the two screws
provided.
Finally, push the front panel back
3.
onto the device with light pres-
sure.
WARNING! WARNING!
Modi Belt Box Timer without a front panel
Slot
For mounting on the
belt box
Plug-in connection for
the light sensor
EN
15