RADEMACHER Modi 2650 Installation And Instruction Manual page 26

i
Setting the automatic sun function
Adopting the current brightness value as the set limit
2.
+
SET
Configure the brightness set limit at which your
i
roller shutter should be lowered.
If the current brightness value is above the meas-
uring range when configuring the set limit, the set
limit is set to the measuring range limit (29).
If it is too dark for a sensible measurement, the
current set limit is retained and configuring the
measuring range limit does not make sense in
this case.
Changing the configured set limit
3.
▲
or
26
Press
This switches on the automatic
sun function.
Press and hold
In addition...
press if you want to
increase ▲ or
reduce ▼ the set limit
EN
I I : I I :
AUTO MANU
▲▼
Example: The current
brightness value is
saved as the set limit.
29 29
AUTO MANU
▲▼
The current set limit is
retained.
- I I
AUTO MANU
▲▼
Value is outside the
measuring range.
I I : I I
AUTO MANU
▲▼
I I
7:
AUTO MANU
▲▼
Example: The set limit
has been reduced in
order to increase the
sensitivity.
Wi
So
Wi
So
Wi
So
:
Wi
So
Wi
So