Connecting The Device - Motorola MD1600 User Manual

walls, ceilings, or other objects that the wireless signals must pass through limit signal
range. Typical ranges vary depending on types of materials and background RF
noise in your home or business.
2.2.2
Connect the DSL port of the router and the Modem port of the splitter
Step 1
with a telephone cable; connect the phone to the phone port of the
splitter through a cable; and connect the incoming line to the Line port of
the splitter.
The spliiter has three ports:

Line: Connect to a wall phone jack (RJ-11 jack)

Modem: Connect to the Line interface of the router

Phone: Connect to a telephone set
Connect the LAN port of the router to the network card of the PC through
Step 2
an Ethernet cable.
Plug the power adapter to the wall outlet and then connect the other end
Step 3
of it to the Power port of the router.
The followig figure displays the connection of the DSL router, PC, and telephones.
User Manual

Connecting the Device

Figure 4 Connecting the DSL router
10