Step9
In this page, you can obtain the DNS server addresses from the selected
WAN interface. After finishing setting, click Next to display the following
page.
Step10
In this page, it displays the information about the IPoA settngs. Click
Apply/Save to save and apply the settings. You can modify the settings
by clicking the Back button if necessary.
4.2.2.5 Adding a Bridge WAN service
This section describes the steps for adding the Bridge WAN service.
Add button to display the following page. (At first, you must add a proper
ATM interface for this WAN service.) Click the Add button to display the
following page.
In the Wide Area Network (WAN) Service Setup page, click the
User Manual
49