Table of Contents
Advertisement
In this page, it displays the information about the PPPoE settngs. Click
Step8
Apply/Save to save and apply the settings.
4.2.2.2 Adding a MER (IPoE) WAN service
This section describes the steps for adding the MER WAN service.
Step1
In the Wide Area Network (WAN) Service Setup page, click the Add
button to display the following page. (At first, you must add a ATM
interface for this WAN service.)
Step2
Select an ATM Interface, and then click Next to display the following
page.
User Manual
33
Advertisement
Table of Contents
