Motorola MD1600 User Manual page 34

In this page, you can modify the PPP username, PPP password, PPPoE
Step4
service name and authentication method.

PPP Username: The correct user name provided by your ISP.

PPP Password: The correct password provided by your ISP.

PPPoE Service Name: If your ISP provides it to you, please enter it. If not,
do not enter any information.

Authentication Method: The value can be AUTO, PAP, CHAP, or MSCHAP.
Usually, you can select AUTO.

Enable Fullcone NAT:. NAT is one where all requests from the same internal
IP address and port are mapped to the same external IP address and port.
Furthermore, any external host can send a packet to the internal host, by
sending a packet to the mapped external address.
User Manual
30