Motorola MD1600 User Manual page 122

5 Q&A
(1)
Q: Why all the indicators are off?
A: Check the following:

The connection between the power adaptor and the power socket.

The status of the power switch.
(2)
Q: Why the LAN indicator is off?
A: Check the following:

The connection between the ADSL router and your computer, hub, or
switch.

The running status of your PC, hub, or switch.
(3)
Q: Why the DSL indicator is off?
A: Check the connection between the "DSL" port of router and the wall jack.
(4)
Q: Why Internet access fails while the DSL indicator is on?
A: Check whether the VPI, VCI, user name, and password are correctly
entered.
(5)
Q: Why I fail to access the web configuration page of the DSL router?
A: Choose Start > Run from the desktop, and ping 192.168.1.1 (IP address of
the DSL router). If the DSL router is not reachable, check the type of the
network cable, the connection between the DSL router and the PC, and
the TCP/IP configuration of the PC.
(6)
Q: How to load the default settings after incorrect configuration?
A: To restore the factory default settings, turn on the device, and press the
reset button for about 1 second, and then release it. The default IP
address and the subnet mask of the DSL router are 192.168.1.1 and
255.255.255.0, respectively.

User/password of super user: admin/admin

User/password of common user: user/user
User Manual
118