Motorola MD1600 Instructions

Hide thumbs Also See for MD1600:

Download this manual

MD1600 Software Update v1.0.0.6

What's New in this Release

•

The Internet Connection page will now automatically refresh to show the current Status

message.

•

Fixed CenturyLink IPoE DHCP and PPPoE Priority Tag 0.

Instructions for the Software Upgrade for the MD1600

Note: It is very important that there are no interruptions to the upgrade process of the software

as it could cause irreparable damage to the unit. We recommend that you use an Ethernet cable

connection from your computer to the router.

If you are using a laptop, make sure that it has sufficient power to complete the process.

1. Download the software file to your computer and make note of the location you saved it to.

2. Connect your computer to the router with an Ethernet cable.

3. Open your web browser (Internet Explorer, Chrome, Safari, etc.) Type in 192.168.0.1 into the

address bar.

Enter the username: admin

Enter the password: motorola and click Login

Page 1 • Fixed CenturyLink IPoE DHCP and PPPoE Priority Tag 0. Instructions for the Software Upgrade for the MD1600 Note: It is very important that there are no interruptions to the upgrade process of the software as it could cause irreparable damage to the unit. We recommend that you use an Ethernet cable connection from your computer to the router.
Page 2 4. Click Advanced at the top menu. 5. On the left side, click Management > Update Software . 6. Click Choose File.
Page 3 8. Now click Update Software. You will see the progress in the bottom left side of your screen. 9. Once the software upgrade has completed, your MD1600 will reboot. Close browser and wait for the power light to turn solid green (on the modem). Once the power light is solid...