Table of Contents
Advertisement
The following procedures instruct users to install a motherboard, a riser card, add-on
cards, and disk drives into the chassis. Please also refer to the Appendix A, Exploded
Diagram and Parts List, for detailed chassis parts lists.
下述步骤指导用户如何在 HPC-7120S 产品内安装母板、附加卡和磁盘驱动器。有关产
品组件的信息，请参考附录 A 的分解图和组件列表。
下述步驟指導使用者如何在 HPC-7120S 產品內安裝主機板、附加卡和磁碟機。有關產
品元件的資訊，請參考附錄 A 的分解圖和元件清單。
Note!
Use caution when installing or operating components with the chassis
open. Be sure to turn off the power, unplug the power cord and ground
yourself by touching the metal chassis before you handle any compo-
nents inside the machine.
机箱打开时，请小心安装或操作机箱内部组件。请务必关闭机箱电源并
断开电源线。接触机箱内部组件之前，请先触摸金属机箱接地。
機箱打開時，請小心安裝或操作機箱內部元件。請務必關閉機箱電源並
拔除電源線。接觸機箱內部元件之前，請先觸摸金屬機箱接地。
Removing the Top Cover/ 移除顶盖 / 移除上蓋
2.1
To remove the cover, please proceed as below.
1.
Unscrew the seven knurled screws on the top side. (see Figure 2.1)
请按照以下步骤移除机箱盖。
1.
旋开 7 个顶盖上侧的螺丝。( 如图 2.1 所示 )
請按照以下步驟移除主機殼蓋。
1.
旋開 7 個頂蓋上側的螺絲。( 如圖 2.1 所示 )
HPC-7120S User Manual/ 用户手册
8
Advertisement
Table of Contents
