Table of Contents
Advertisement
Control Panel Interface (mounted above dispenser assembly) MSZ8..
Example above shows Sequence '07' of the Auto Test in the freezer temperature display and fault code '7'
to '0' fl ashing alternatively in the fridge temperature display.
• Check evaporator heater / connections.
Fault conditions: are signalled to the engineer during Auto Test.
See chart below for AUTO TEST fault codes and explanations.
TEMPERATURE DISPLAY
Fridge
8
0
to
fl ashing alternatively
7
0
to
fl ashing alternatively
6
0
to
fl ashing alternatively
5
0
to
fl ashing alternatively
4
0
to
fl ashing alternatively
3
0
to
fl ashing alternatively
2
0
to
fl ashing alternatively
9
0
to
fl ashing alternatively
H
0
to
fl ashing alternatively
1
0
to
fl ashing alternatively
Note: If two or more fault codes have been recognised, they will display alternately at 1 second intervals.
Service Manual
SIDE-BYSIDE
AUTO-TEST FAULT CODE
Relay K008 on module faulty (for Damper)
Evaporator Defrost Heater - resistance can be obtained from
power module 12PIN block term 1 & 16PIN block term 1
Fridge Sensor (thermistor)
Freezer Sensor (thermistor)
Evaporator Fan
Condenser Fan
Damper (baffl e)
Water Valve for Icemaker
Icemaker (Sankyo)
Water Valve for Water Dispenser
Edition
2008.09.02
20
(explanations)
Language
English
Advertisement
Table of Contents
