Indesit MSZ801DF Service Information page 26

ADJUSTING WATER QUANTITY:
The quantity of water is time regulated and is serial adjusted to 7,5 seconds, that estimates 125 ccm water.
When the small hole is centred in the larger hole (see picture 1) the water fi ll adjustment is for 7,5 seconds
fi ll time (normal).
Turning the water level adjustment screw (see picture 2) moves the contact in relation to the contact ring
segment (see picture 3).
turning the screw clockwise = decreases water fi lling
turning the screw counter-clockwise = increases water fi lling
A complete rotation (360°) effects a fi lling of 40 cm³ water (~ 2,4 sec.)
A half rotation (180°) effects a fi lling of 20 cm³ water(~ 1,2 sec.)
ATTENTION :
Only one rotation is possible. Further adjustment could damage the module! If the adjustment screw falls out,
just put it back in and align the hole in the sight hole as shown in picture 1.
PICTURE 1
PICTURE 2
For more details see appendix "Icemaker Information Letter_IDI_system".
Service Manual
SIDE-BYSIDE
PICTURE 3
PICTURE 3
Adjustment screw
Contact ring
Adjustment screw
Edition
2008.09.02
26
Contact
Language
English