Indesit MSZ801DF Service Information page 4

MODEL INTRODUCTION
The models included in this publication are 1765 mm high Side by Side no-frost Fridge Freezers that were
introduced in July 2007. All models are similar with regard to the furniture design, but there are variations for
exterior colour.
Models MSZ801DF, MSZ802DF and MSZ803DF interior:
The interior of the fridge has safety glass shelves, one meat drawer (chiller) and one humidity controlled
salad bin (crisper) with a glass cover. The door has two deep shelf, dairy shelf with a lid, a commodity shelf
and lower bottle shelf.
The interior of the freezer section has two drawers of varying sizes, two safety glass shelves of varying sizes
and ice cube maker. The door has four commodity shelves of varying sizes.
For banding and colour information, refer to the Front Cover and or Specifi cations page.
The appliance is "no-frost" design so defrosting is automatic.
All models have wheels at the rear and wheels / adjustable feet at the front.
The digital display interface module (7 ~ segment LED) is mounted in the front of the freezer door with the
drinks dispenser, the fast freeze button and ice maker controls are also mounted in the same area.
The fridge and freezer temperature settings are adjusted by selecting the + / - buttons next to the relevant
temperature display window. All functions are monitored and actioned by the power module mounted at the
rear of the appliance within the compressor compartment.
The climate class is N / ST signifying that it is designed to operate in ambient temperatures between +16°C
to +38°C.
As with many refrigeration appliances, it is important that it is installed and operated within the recommended
ambient temperature range and that there is adequate ventilation.
All appliances equipped with an automatic ice-maker and water dispenser must be connected to a water
supply that only delivers drinking water. See specifi cation page for pressure requirements.
Service Manual
SIDE-BYSIDE
Edition
2008.09.02
4
Language
English