Extension Cards; Insert An Extension Card; Fig. 8-14:Loosen The Fastening Screws Of The Cover - Bosch REXROTH VSB 40.1 Project Planning Manual

8-10
Maintenance and Installation
8.5

Extension Cards

Insert an Extension Card

To plug extension cards slots for the PCI bus are available.
Risk of damage to the operator terminal or the
extension cards by electrostatic discharges!
⇒ Comply with all ESD-protection measures during
working with modules and components! Avoid
CAUTION!
electrostatic discharges!
Risk of damage to the operator terminal or
corruption of application software by
integrating non-released extension cards!
⇒ Install only released extension cards, and have them
CAUTION!
installed by skilled employees.
1. Shutdown the operating system.
2. Wait until the power supply unit switches off automatically and then,
switch off the supply voltage. If required, unplug all connectors from
the VSB 40.1.
3. Put the VSB 40.1 on a solid mat, so that the connector panel looks in
your direction.
4. Loosen and remove the two fastening screws of the cover:
Fig. 8-14: Loosen the fastening screws of the cover
VSB 40.1
84_Deckel.JPG
DOK-SUPPL*-VSB*40.1***-PR02-EN-P