Fig. 6-4: Confirm Desktop Change - Bosch REXROTH VSB 40.1 Project Planning Manual

VSB 40.1
DOK-SUPPL*-VSB*40.1***-PR02-EN-P
4. If an external monitor is connected, you can select on the left side by
clicking on the corresponding icons, if you want to address only the
external monitor (select "Monitor"), only the screen of the connected
VDPs (select
"Intel(R) Dual Display Clone").
5. After confirming using <OK>, another window opens where the
selection is to be reconfirmed by pressing <OK>. Otherwise, the
monitor selection is not applied.
Fig. 6-4: Confirm Desktop Change
Note: If the connected external monitor or the connected VDP is
black, as the corresponding graphic driver is not activated, you
can also select the desired action blindly by using the key
combinations illustrated in the figure on the next page in the
"Hot Keys" tab.
Thereby, "Monitor" corresponds to the external monitor and
"Notebook" to the VDP.
The key combinations can only be activated, if a user is logged
in.
Display and Operating Components
"Notebook") or both
6-3
screens (select
Bestätigen.bmp