7-10
PC Box
PC Power Supply
24 VDC Power Supply
This screw connection is used for device variants for 24 VDC. All
internally required voltages are generated from the 24 VDC supply.
Fig. 7-10:
Connection terminal for the 24 VDC supply
Note:
Only copper wire is to be used to connect these terminals.
Tighten the screws of the screw terminals with a torque of 0.4
Nm (1.81 kg in).
Parameters
Input voltage U
N
Residual ripple for U
N
Power consumption for 19 VDC
Overload protection
Short-circuit protection
Fig. 7-11:
Technical data 24 VDC connection
Value
24 VDC ; (19 ... 32 VDC)
See figure on the following page
20 A max.
Deactivation with automatic restart
Deactivation with automatic restart
DOK-SUPPL*-VSB*40.1***-PR02-EN-P
VSB 40.1
Anschluss24V.jpg