5-6
Dimensions and Installation Notes
5.3
Installation Notes
• Avoid installation locations exposed to direct sunlight, as additional
heat development can occur.
• When determining installation location and mounting position observe,
that the optionally available drive can be opened unobstructed.
• Install the VSB in a manner ensuring easy access to the connector
panel.
• Provide a sufficient clearance of 50 mm (on all sides) for cooling and
cable routing behind the device.
• Lay all connecting cables in loops and use strain reliefs for all cables.
• Keep as much distance as possible to noise sources.
• Fasten the VSB with four screws M6 at the integrated mounting
brackets.
VSB 40.1
DOK-SUPPL*-VSB*40.1***-PR02-EN-P