VSB 40.1
DOK-SUPPL*-VSB*40.1***-PR02-EN-P
7. Tip the VSB 40.1 to the left side.
Fig. 8-9:
Tip the VSB 40.1 to the left and remove it from the mounting plate
8. Now, you can loosen the cables (IDE and power supply) from the
hard disk and put the VSB 40.1 on its left side. If necessary, you must
loosen the cables from the CD-DVD drive to be able to position the
VSB 40.1.
Fig. 8-10:
Loosen the cable from the hard disk
Maintenance and Installation
83_LS_gekippt.JPG
83_LS_offen2.JPG
8-7