Configuring Image Settings; Configuring Display Settings - Honeywell HEICC-2736-WI User Manual

User Manual of Explosion-Proof Bullet Camera

6.3 Configuring Image Settings


On the event configuration page, click

Click the direction buttons to control the pan/tilt movements.

Click the zoom/iris/focus buttons to realize lens control.

The functions vary depending on different camera models.

6.3.1 Configuring Display Settings

Purpose:
Configure the image adjustment, exposure settings, day/night switch, backlight settings, white
balance, image enhancement, video adjustment, and other parameters in display settings.

The parameters in Display Settings interface vary depending on different camera models.

You can double click the live view to enter full screen mode and double click it again to exit.
Day/Night Auto-Switch
Steps:
1. Enter the Display settings interface, and select Auto-Switch from the dropdown list.
Configuration > Image> Display Settings
2. Set the image parameters of the camera.
 Image Adjustment
Brightness describes bright of the image, which ranges from 1 to 100.
Contrast describes the contrast of the image, which ranges from 1 to 100.
Saturation describes the colorfulness of the image color, which ranges from 1 to 100.
to show the PTZ control panel or click
Figure 6-23 Display Settings - Auto-Switch
67
to hide it.