Table of Contents
Advertisement
User Manual of Explosion-Proof Bullet Camera
detection. Refer to Section 5.2.1 Configuring Motion Detection.
6. Click
Notify Surveillance Center, Send Email, Trigger Alarm Output and Trigger Recording are
selectable. Refer to Section 5.2.1 Configuring Motion Detection.
7.
Click
5.3.2 Configuring Intrusion Detection
Intrusion detection can set an area in the surveillance scene and once the area is entered, a set
of alarm action is triggered.
Steps:
1. Enter the intrusion detection interface:
Configuration > Events > Smart Event >Intrusion Detection
2. Check the Enable Intrusion Detection checkbox.
3. The event triggered and park action related PTZ movement will be locked for 180 seconds
after you enter the intrusion detection interface. Optionally, you can click the
tab to select the linkage method taken for the audio input exception,
to save the settings.
Figure 5-21 Configuring Intrusion Area
button to manually activate the movement, or lock the movement
44
Advertisement
Table of Contents
