If you enable Anti-overexposure, the effect of manual IR adjustment may be not
Note:
obvious.
Configuring Image Settings
Go to Setup Camera Setup Image Settings.
On this page, you can configure the white balance and adjust image parameters.
Two sets of image settings are available:
•
In Normal Light Mode tab, configure normal situations for image settings.
•
In Profile Mode tab, configure special situations for image settings.
Figure 41 Image Settings
White Balance
Adjust the value for the best color temperature.
Auto: Select it and the camera will automatically adjust the color temperature.
Fixed current: Select it and the camera will use current color temperature value.
Manual: You can manually tune the color temperature by dragging the R Gain and B
Gain slider.
Image Adjustment
Brightness: Adjust the image brightness level (0% to 100%).
Contrast: Adjust the image contrast level (0% to 100%).
Saturation: Adjust the image saturation level (0% to 100%).
Sharpness: Adjust the image sharpness level (0% to 100%).
34
Honeywell 30 Series IP Cameras User Guide