Configuring Image Settings; White Balance; Figure 4-8 Image Settings - Honeywell 60 Series Configuration Manual

Honeywell 60 Series IP Camera Software Configuration Guide
IR Adjustment: Adjust the luminance of IR lights.
•
Auto IR adjust: Select it to control the luminance of IR lights automatically.
•
Manual IR adjust: Select it to control the luminance of IR lights manually. To increase the
luminance of IR lights, drag the slider to the right; to decrease the luminance of IR lights,
drag the slider to the left.
Note The Smart IR function is not applicable for HC60WZ2E30.

Configuring Image Settings

Go to Setup Camera Setup  Image Settings.
On this page, you can configure the White balance and adjust Image parameters.
Two sets of image settings are available:
•
In Normal Light Mode tab, configure normal situations for image settings.
•
In Profile Mode tab, configure special situations for image settings.
•
Night Mode: Check Enable to apply these settings at and select this mode to apply
the settings at night.
•
Schedule Mode: Check Enable to apply these settings at and select this mode to
apply the settings at a specific period. Enter the time manually in the field.

Figure 4-8 Image Settings

White Balance

Adjust the value for the best color temperature.
Auto: Select it and the camera will automatically adjust the color temperature.
28