Table of Contents
Advertisement
Quick Links
Slimline Q5 Series
LEDJ58 - 5Q5 RGBW Black housing
LEDJ58A - 5Q5 RGBW White housing
LEDJ59 - 7Q5 RGBW Black housing
LEDJ59A - 7Q5 RGBW White housing
Convection
cooled,
LEDJ59B - 7Q5 RGBA Black housing
no fan!
LEDJ59C - 7Q5 RGBA White housing
5W quad-colour LEDs
(RGBW/RGBA)
User Manual
Order codes:
Optional
IR remote
Order ref:
LEDJ90C
Advertisement
Table of Contents
Related Manuals for Ledj Slimline Q5 Series
Summary of Contents for Ledj Slimline Q5 Series
- Page 1 Slimline Q5 Series 5W quad-colour LEDs (RGBW/RGBA) User Manual Order codes: LEDJ58 - 5Q5 RGBW Black housing LEDJ58A - 5Q5 RGBW White housing LEDJ59 - 7Q5 RGBW Black housing LEDJ59A - 7Q5 RGBW White housing Optional Convection IR remote cooled,...
-
Page 2: Safety Advice
NO USER SERVICEABLE PARTS. pulling the power-cable. • This lighting fixture is for professional use only - it is • Make sure that the available mains supply voltage is not designed for or suitable for household use. The between 100~240V AC, 50/60Hz. product must be installed by a qualified technician in accordance with local territory regulations. The safety of • Make sure that the power cable is never crimped or the installation is the responsibility of the installer. The damaged. Check the equipment and the power cable fixture presents risks of severe injury or death due to fire periodically. hazards, electric shock and falls. • If the equipment is dropped or damaged, disconnect the • Warning! Risk Group 2 LED product according to mains power supply immediately and have a qualified EN 62471. Do not view the light output with optical engineer inspect the equipment before operating again. instruments or any device that may concentrate the beam. • WARRANTY: One year from date of purchase. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. www.prolight.co.uk Slimline Q5 Series User Manual... - Page 3 224 x 202 x 99mm • Convection cooled Weight 2.5kg • Optional IR remote (LEDJ90C) Order codes LEDJ58 - RGBW LEDJ59 - RGBW Black housing • Linkable with the Slimline 12Q5 Black housing LEDJ59A - RGBW White housing 202mm 99mm LEDJ58A - RGBW LEDJ59B - RGBA Black housing White housing LEDJ59C - RGBA White housing 7Q5 RGBW version 25° - Lux 7725 2280 25° 5Q5 RGBW version 7Q5 RGBA version 25° - Lux 3040 25° www.prolight.co.uk Slimline Q5 Series User Manual...
-
Page 4: Technical Specifications
POWER OUTPUT DMX OUTPUT DMX INPUT 100-240V~50/60Hz FUSE: T1A/T2A 250V MENU ENTER DOWN 01 - LED display 04 - IEC power input 07 - 3-Pin DMX input In the box: 1 x fixture, 02 - Function buttons 05 - IEC power output 08 - Fuse: T1A 250V (5Q5) 1 x power cable & T2A 250V (7Q5) 1 x user manual 03 - Earth point 06 - 3-Pin DMX output www.prolight.co.uk Slimline Q5 Series User Manual... -
Page 5: Dmx Channel Mode
000-255 Strobe 000-255 Red (0-100%) 000-255 Red (0-100%) 000-255 Green (0-100%) 000-255 Green (0-100%) 000-255 Blue (0-100%) 000-255 Blue (0-100%) 000-255 White (0-100%) 000-255 Amber (0-100%) 000-004 Blackout 000-004 Blackout 005-080 Colour macro 005-080 Colour macro 081-150 Colour change 081-150 Colour change 151-255 Colour fade 151-255 Colour fade www.prolight.co.uk Slimline Q5 Series User Manual... - Page 6 If you set to and and to zero, your unit will show only red LEDs. Press the “ENTER” button to confirm the setting and move to the next colour. To exit out of any of the above options, press the “MENU” button. Built-in program mode: Pr-- To access built-in program mode press “MENU” until the display shows on the LED display. Pr00 Pr20 Press the “ENTER” button and use the “UP” and “DOWN” buttons to select between SP-0 Press the “ENTER” button and use the “UP” and “DOWN” buttons to select the speed between Sp-9 . Press the “ENTER” button and use the “UP” and “DOWN” buttons to select the flash speed F--0 F--9 between To exit out of any of the above options, press the “MENU” button. Slave mode: SLAU Press the “MENU” button on the rear of the unit to show on the LED display and press the “ENTER” button to confirm the setting. The unit will now run in sequence with the master unit. To exit out of any of the above options, press the “MENU” button. Please ensure that all slave units are set to the same DMX channel mode as the master unit. www.prolight.co.uk Slimline Q5 Series User Manual...
-
Page 7: Sound-Active Mode
Pr12 - RGW Pr12 - RGA Pr13 - RBW Pr13 - RBA Pr14 - GBW Pr14 - GBA Pr15 - RGBW Pr15 - RGBA Pr16 - Colour change (15 colours) Pr16 - Colour change (15 colours) Pr17 - Colour fade (15 colours) Pr17 - Colour fade (15 colours) Pr18 - Colour change (4 colours) Pr18 - Colour change (4 colours) Pr19 - Colour fade (4 colours) Pr19 - Colour fade (4 colours) Pr20 - Colour change (3 colours) Pr20 - Colour change (3 colours) Slave mode Slave mode SLAV SLAV Sound active mode Sound active mode SU00~SU99 SU00~SU99 DMX mode 2CH, 3CH, 4CH, 7CH DMX mode 2CH, 3CH, 4CH, 7CH Address setting Address setting A001~A512 A001~A512 www.prolight.co.uk Slimline Q5 Series User Manual... -
Page 8: Important Notes
• Now press the “2” button, and the white/amber • N ow press the “5” button, and the white/amber LEDs will come on, the third digit 5 has been set. LEDs will come on, the third digit 5 has been set. The full DMX address setting has been changed The full DMX address setting has been changed • N ow press the “DMX MODE” button to save • Now press the “DMX MODE” button to save the new address into memory the new address into the memory Important notes: • Set the DMX address on each fixture before plugging into the DMX controller • The IR remote cannot be used when the fixture(s) are being controlled with a DMX controller • The maximum IR transmitter distance is 10m - Please make sure that you have the IR remote aimed directly at the front panel of each fixture to be programmed • If you do not press the “DMX MODE” button after you have changed the DMX address when you power down the fixture it will lose the address you have set www.prolight.co.uk Slimline Q5 Series User Manual... -
Page 9: Dmx Setup
DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below. Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. Please quote: CABL10 – 2m CABL11 – 5m CABL12 – 10m Also remember that DMX cable must be daisy chained and cannot be split. www.prolight.co.uk Slimline Q5 Series User Manual... -
Page 10: Line Termination
5-pin XLR (socket) 3-pin XLR (socket) Pin 1: GND (screen) Pin 1: GND (screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C www.prolight.co.uk Slimline Q5 Series User Manual... -
Page 11: Weee Notice
WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk Slimline Q5 Series User Manual... -
Page 12: Optional Accessories
DMX MODE SOUND ACTIVE SLAVE SET ADDR 1 2 3 4 5 6 0 7 8 9 Optional IR remote Optional Quad Case (Holds 4 x fixtures) Order code: LEDJ90C Order code: CASE71 To keep up-to-date on the latest accessories and product range additions please visit www.prolight.co.uk www.prolight.co.uk Slimline Q5 Series User Manual...