Husqvarna K1270 Workshop Manual page 21

7.5. AIR FILTER
1. Remove the cover's three screws and remove
the ait filter cover.
2. Unscrew the filter's centre screw.
3. Vacuum the area around the filter.
Carefully lift up the paper filter so that dust
does not fall into the carburettor inlet.
7.6. CYLINDER COVER
1. Loosen the cylinder covers' five screws.
2. Lift off the cylinder cover.
Dismantling into basic modules
REMOVE THE HOOD
REMOVE THE AIR FILTER
REMOVE THE CYLINDER COVER
21
English -