Cycle Decode - HIKVISION DS-6300DI-JX Series User Manual

User Manual of DS-6300DI-JX Decoder
Decode Channel: Select the Decode Channel for the screen display
Manufacturer: Select the Manufacturer of camera connected for decoding.
Note: Currently the encoding devices from the following manufactures are supported: PRIVATE, PANASONIC,
SONY, AXIS, SANYO, BOSCH, ZAVIO, ACTI, INFNOVA, SUNELL, ATEME, etc.
Remote Host IP Address: Enter the IP address of the encoding device.
Remote Host Port: Enter the port of the encoding device.
Remote Host Channel: Enter the channel number of the encoding device for decoding.
User Name/Password: Enter the user name and password used for login to the encoding device.
Enable Stream Media Server: Enable the stream media server if required, and enter the IP address of the server.
After all settings have been configured, click Start Dec button to start decoding, and the decoding status can be
viewed in the Connection Status or the Decode Channel Status interface.

5.1.3 Cycle Decode

Cycle decoding, compared with the dynamic decoding, means that you configure many decoding input (the remote
encoding device) to one output (the channel displayed on the screen).
Steps:
1. Click Decode OperationCycle Decode to enter the Cycle Decode interface:
2. Select the Decode Channel for decoding and enter the Cycle Time in the interface. The cycle time refers to the
time duration for decoding the input signal to display on the certain channel on the screen.
34