HIKVISION DS-6300DI-JX Series User Manual page 28

User Manual of DS-6300DI-JX Decoder
Steps:
1. Click Save on the right of the bottom toolbar to save the setting of the TV wall layout you just set and
enters the following interface to configure the encoding devices to the decoding channel.
Note: Prior to setting the encoding device for the decoding channel, you must add the encoding devices to the
iVMS-4200 client software under Main Control>Import Camera settings interface. The encoding device can be a
network camera, DVR, NVR or encoder.
In this configuration interface, the left bar lists the encoding devices which have been added to the client software,
and the bottom bar with the configuration of the decoding action.
Description of the buttons on the bottom bar:
Button
Showing Live View
Stop Cycle Decoding
2. Click and drag the encoding channels to the screen on the TV Wall.
If you want to edit the TV Wall layout again, you can click the Edit TV Wall button to get back to the TV Wall
setting interface.
Description
PTZ Control
Stop Decoding
Button
27
Description
Alarm Decoding Mode
Start Decoding
Start Cycle Decoding