General Safety Information; List Of Warnings - Macurco DVP-120B User Instructions

1 General Safety Information

1.1 List of warnings

Each person using this equipment must read and understand the information in these User Instructions before use. Use of this
•
equipment by untrained or unqualified persons or use that is not in accordance with these User Instructions, may adversely
affect product performance and result in serious injury or death.
This equipment helps monitor for the presence and concentration level of certain specified airborne gases. Misuse may
•
produce an inaccurate reading, which means that higher levels of the gas being monitored may be present and could result in
overexposure and result in serious injury or death. For proper use, see supervisor or User Instructions, or call Macurco
Technical Service at 1-844-325-3050.
DVP-120B may not function effectively below 32°F (0°C) or above 104°F (40°C). Using the equipment outside of this
•
temperature range may adversely affect product performance and result in serious injury or death.
High voltage terminals (120/240 VAC) are located within the DVP-120B, presenting a hazard to service technicians. Only
•
qualified technicians should open the DVP-120B case and service the internal circuits. Ensure power is removed from the
DVP-120B prior to servicing the unit.
Immediately exit any environment that causes an alarm condition on the sensor. Failure to do so may result in serious injury
•
or death.
Each time the unit is turned on it performs a self-test, which activates the audible and visual alarms. If the self-test fails, or all
•
the alarms do not activate, do not use. Failure to do so may adversely affect product performance and result in serious
injury or death.
Do not cover or obstruct audible alarm opening or visual alarm LED. Doing so may adversely affect product performance and
•
result in serious injury or death.
Do not disassemble unit or attempt to repair or modify any component of this instrument. This instrument contains no user
•
serviceable parts, and substitution of components may adversely affect product performance and result in serious injury or
death.
Use only for monitoring the gases which the sensors and equipment are designed to monitor. Failure to do so may result in
•
exposures to gases not detectable and result in serious injury or death. For proper use, see supervisor or User Instructions,
or call Macurco Technical Support at 1-844-325-3050.
WARNING
4