Macurco DVP-120B User Instructions page 39

3 Double tap
•
4 Triple tap
•
5 Off
•
4.3.8.7 Warning Horn Signal
This display example shows that the horn will not signal a warning condition. The signal definitions are:
1 Continuous
•
2 Intermittent
•
3 Double tap
•
4 Triple tap
•
5 Off
•
4.3.8.8 Warning Strobe Signal
This display example shows that the strobe will not signal a warning condition. The signal definitions are:
1 Continuous
•
2 Intermittent
•
3 Double tap
•
4 Triple tap
•
5 Off
•
4.3.8.9 Trouble Signal Summary
The trouble signals are in response to one or more sensor faults, either as a defined current level or because of wiring problems.
This display example shows that troubles are signaled by the internal buzzer only.
4.3.8.10 Trouble Buzzer Signal
This display example shows that the buzzer will signal a trouble condition with a triple tap signal. The buzzer signal definitions are:
1 Continuous
•
2 Intermittent
•
Two beeps at five-second intervals
Three short beeps at ten-second intervals
Buzzer will not sound (default)
W a r n i n g
H o r n : 5
Figure 4-57 Strobe Warning Signal
One second on at two-second intervals
Two beeps at five-second intervals
Three short beeps at ten-second intervals
Horn will not sound (default)
W a r n i n g
S t r o b e : 5
Figure 4-58 Strobe Warning Signal
One second on at two-second intervals
Two beeps at five-second intervals
Three short beeps at ten-second intervals
Strobe will not flash (default)
T r o u b l e
B u z z
Figure 4-59 Trouble Signals
T r o u b l e
B u z z : 4
Figure 4-60 Buzzer Trouble Signal
One second on at two-second intervals
S i g n a l s
O F F
S i g n a l s
O F F
S i g n a l s
S i g n a l s
T r i p l e
39