Table of Contents
Advertisement
[TIME]
[DATE]
[TC]
[CLIP NAME]
(Factory setting: [USER])
[TC IN/OUT SEL]
Sets the input/output of the <TC IN/OUT> terminal.
[TC IN]
[TC OUT]
(Factory setting: [TC IN])
[TC OUT REF]
Sets the output delay of the time code that is output from the <TC IN/OUT> terminal.
[RECORDING]
[SDI OUT]
(Factory setting: [RECORDING])
[REC COUNTER]
Sets operation of the counter for recording.
[TOTAL]
[CLIP]
(Factory setting: [TOTAL])
[TIME STAMP]
Selects whether to superimpose the date and time on videos that are shot. The display for the year, month, and day follows the [DATE FORMAT]
setting.
[OFF]
[DATE]
[TIME]
[DATE&TIME]
(Factory setting: [OFF])
@
NOTE
t The setting is fixed to [OFF] when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[NETWORK] menu
Sets the setting regarding the network function.
[DEVICE SEL]
Select the device that connects external equipment (computer, etc.) to the camera.
The camera may restart when the setting is changed.
[LAN]
[WLAN]
[OFF]
(Factory setting: [OFF])
[NETWORK FUNC]
Selects the network function of the camera.
[STREAMING]
[NDI|HX]
[OFF]
(Factory setting: [OFF])
@
NOTE
t When [NDI|HX] is selected, recording and thumbnail display are not possible.
Chapter 4 Operation — Menu settings
Selects the local time. (hh, mm, ss)
Selects the local date and time. (YY, MM, DD, hh)
Records the time code value as user bits.
Records the value that CAM INDEX (one character) and CARD COUNT (three-digit number) both converted to ASCII
character code.
Only enabled when the [SYSTEM] menu → [FILE FORMAT] → [MOV] is set.
Sets to the time code input.
Sets to the time code output.
Outputs the recording time code without delay. This is used when performing simultaneous recording on two cameras with
the time code of this camera as the master.
Matches to output image from the <SDI OUT> terminal. Outputs without delay when video is not output from the <SDI OUT>
terminal.
Performs continuous counting until reset using the <RESET> button.
Clears the counter value at the start of recording and counts the time for each recording.
Does not superimpose the date and time.
Superimposes only the date.
Superimposes only the time.
Superimposes the date and time.
Connects via a wired LAN.
Connects via a wireless LAN.
Does not connect.
Enables the streaming function.
Enables the NDI|HX function.
Does not use the network function.
– 97 –
Advertisement
Table of Contents
