Table of Contents
Advertisement
@
NOTE
t The setting is fixed to [OFF] when the [CAMERA] menu → [SW MODE] → [GAIN/ISO MODE] is set to [ISO].
[AGC LIMIT]
Sets the maximum gain value during [AGC] operation.
The items that can be set are as follows.
f [3dB], [6dB], [12dB], [18dB]
(Factory setting: [6dB])
@
NOTE
t This cannot be set when the [CAMERA] menu → [SW MODE] → [GAIN/ISO MODE] is set to [ISO].
[AGC POINT]
Sets the F value to switch control from auto iris to [AGC] during [AGC] operation.
The items that can be set are as follows.
f [F4.0], [F5.6]
(Factory setting: [F4.0])
@
NOTE
t This cannot be set when the [CAMERA] menu → [SW MODE] → [GAIN/ISO MODE] is set to [ISO].
[A.SHUTTER]
Sets the auto shutter control operations when [ON] is selected in [A.IRIS].
[ON]
[OFF]
(Factory setting: [ON])
[A.SHUTTER LIMIT]
Sets the maximum shutter value during [A.SHUTTER] operation.
The items that can be set are as follows.
f [1/100], [1/120], [1/250]
(Factory setting: [1/250])
[A.SHUTTER POINT]
Sets the F value to switch control from auto iris to [A.SHUTTER] during [A.SHUTTER] operation.
The items that can be set are as follows.
f [F8.0], [F9.6]
(Factory setting: [F8.0])
[ATW]
Sets the operations of the auto tracking white balance function.
[ON]
[OFF]
(Factory setting: [ON])
[AF]
Sets the operation of the auto focus.
[ON]
[OFF]
(Factory setting: [ON])
[USER SW]
Sets the function to assign to the <USER 1> to <USER 7> buttons or the [USER8] to [USER12] button icons.
For details, refer to "Assigning function to the USER buttons" (page 53).
Following functions can be assigned to [USER1] to [USER12].
f [INHIBIT], [AWB], [DRS], [FBC], [ONE PUSH AF], [S.GAIN], [AREA], [AF AREA], [ATW], [ATW LOCK], [SPOTLIGHT], [BACKLIGHT], [A.IRIS LEVEL],
[IRIS], [Y GET], [FOCUS MACRO], [O.I.S.], [O.I.S. MODE], [i.ZOOM], [D.ZOOM], [IR REC], [FAST ZOOM], [ADAPTIVE MATRIX], [PRE REC],
[VFR], [SUPER SLOW], [REC CHECK], [BACKGR PAUSE], [DEL LAST CLIP], [SLOT SEL], [AUDIO CH1 LEVEL], [AUDIO CH2 LEVEL], [EXPAND],
[PEAKING], [WFM], [ZEBRA], [LEVEL GAUGE], [LEVEL GAUGE SET], [LCD/VF HDR], [LCD/VF V-Log], [VF ON/OFF], [LCD/VF DETAIL], [AUDIO
MON SEL], [AUDIO OUT], [MENU], [LOAD SETUP FILE], [LCD BACKLIGHT], [CARD READER MODE], [STREAMING START]
[USER1]
Chapter 4 Operation — Menu settings
Performs the operation of the auto shutter when in auto mode.
Does not perform the operation of the auto shutter when in auto mode.
Activates the auto tracking white balance function when in auto mode. The [ATW] function cannot be switched between
enabled and disabled with the <WHITE BAL> switch or the USER buttons.
However, if [ATW LOCK] is assigned to the USER button, the white balance value can be fixed with the USER button.
Does not perform the [ATW] function operation in auto mode. Performs the operation of the white balance function selected
with the <WHITE BAL> switch.
Performs the operation of the auto focus when in auto mode.
The <FOCUS> switch does not work.
Does not perform the operation of the auto focus when in auto mode.
Performs the operation of the focus selected with the <FOCUS> switch.
Sets the function to assign to the <USER 1> button.
(Factory setting: [O.I.S.])
– 71 –
Advertisement
Table of Contents
