Table of Contents
Advertisement
[OFF]
(Factory setting: [ON])
[O.I.S. MODE]
Switches the operation mode of the optical image stabilizer function.
Toggles [NORMAL], [PAN/TILT], and [STABLE] in order each time the USER button to which [O.I.S. MODE] is assigned is pressed or the USER button
icon is touched.
[NORMAL]
[PAN/TILT]
[STABLE]
(Factory setting: [NORMAL])
[ATW]
Assigns the auto tracking white balance function to the <WHITE BAL> switch.
The items that can be set are as follows.
f [Ach], [Bch], [PRE], [OFF]
(Factory setting: [OFF])
[ATW SPEED]
Sets the control speed of the auto tracking white balance function.
The items that can be set are as follows.
f [FAST], [NORMAL], [SLOW]
(Factory setting: [NORMAL])
[ATW TARGET R]
Finely adjusts the Rch output for convergence with the auto tracking white balance operation.
The items that can be set are as follows.
f [−10]...[10]
(Factory setting: [0])
[ATW TARGET B]
Finely adjusts the Bch output for convergence with the auto tracking white balance operation.
The items that can be set are as follows.
f [−10]...[10]
(Factory setting: [0])
[W.BAL PRESET]
Sets the color temperature to be assigned to the <PRST> position of the <WHITE BAL> switch.
The items that can be set are as follows.
f [3200K], [5600K], [VAR]
(Factory setting: [3200K])
[W.BAL VAR]
Sets the value of [VAR] in [W.BAL PRESET].
The setting can also be operated by the multidial button.
Enabled when [W.BAL PRESET] is set to [VAR] and the <WHITE BAL> switch is at <PRST>.
The items that can be set are as follows.
f [2000K]...[15000K]
(Factory setting: [3200K])
[H.ZOOM SPEED]
Sets the zoom speed of the handle zoom.
The items that can be set are as follows.
f [1]...[99]
(Factory setting: [50])
[i.ZOOM]
Keeps the image quality while performing digital zoom.
[ON]
[OFF]
(Factory setting: [OFF])
[MF ASSIST]
Sets whether to adjust the last focus automatically when in the manual focus mode.
If the image is largely out of focus, the focus may not be adjusted properly.
[ON]
Chapter 4 Operation — Menu settings
Disables the hybrid optical image stabilizer function.
Specifies the standard setting for a good balance of correction for large and small camera shake.
Specifies a setting appropriate for shooting that uses a lot of panning and tilting of the camera.
Specifies a setting appropriate for fixing a composition to shoot a subject.
Enables the i.ZOOM function.
Disables the i.ZOOM function.
Adjusts the last focus automatically.
– 69 –
Advertisement
Table of Contents
