Panasonic AJ-UPX360ED Operating Instructions Manual page 169

26 Zoom
Displays the zoom value.
The display of the zoom value follows the setting in the [VIDEO OUT/LCD/VF] menu → [INDICATOR] → [ZOOM/FOCUS].
Displays in the position value from [000] to [999] when set to [NUMBER].
Displays in millimeter unit when set to [mm/feet] or [mm/m].
Displays [i] when i.ZOOM is enabled.
[i] is displayed with black and white inverted when i.ZOOM is operating.
[Z] is displayed with black and white inverted when [FAST ZOOM] is enabled.
27 System resolution/system frequency
Displays the system resolution and the system frequency set in the [SYSTEM] menu → [REC FORMAT].
f [2160-59.94p]
f [2160-50.00p]
f [2160-29.97p]
f [2160-25.00p]
f [2160-23.98p]
f [1080-59.94p]
f [1080-50.00p]
f [1080-29.97p]
f [1080-25.00p]
f [1080-23.98p]
f [1080-59.94i]
f [1080-50.00i]
f [720-59.94p]
f [720-50.00p]
f [480-59.94i]
f [576-50.00i]
28 Recording format
Displays the file format and the recording codec set in the [SYSTEM] menu → [FILE FORMAT] and [REC FORMAT].
It is not displayed when set to the [NETWORK] menu → [NETWORK FUNC] → [NDI|HX].
f [P2 AVC-I200]
f [P2 AVC-I100]
f [P2 AVC-I50]
f [P2 AVC-I422]
f [P2 AVC-G50]
f [P2 AVC-G25]
f [P2 AVC-G12]
f [MOV 420 150M]
f [MOV 420 100M]
f [MOV 422 150M]
f [MOV 422 100M]
f [MOV 422 50M]
f [MOV HEVC 200M]
f [MOV HEVC 150M]
f [MOV HEVC 100M]
f [MOV ALL-I 400M]
f [MOV ALL-I 200M]
f [MOV ALL-I 100M]
f [AVCHD PS]
f [AVCHD PH]
f [AVCHD HA]
f [AVCHD PM]
f [AVCHD SA]
29 Clip name
Displays the name of the clip being recorded with up to eight characters from the beginning.
30 Recommended ND filter
Displays the ND filter recommended in the current shooting condition.
31 Message display area
Displays the message such as the camera status or the warning.
Displays the warning status of the camera in the STATUS screen for the mode check.
32 Level gauge
Tilt in horizontal direction or vertical direction can be checked.
Displayed only on the LCD monitor and the viewfinder.
33 Error display of auto white balance
Displays the error status of the auto white balance.
34 Error display of auto black balance
Displays the error status of the auto black balance.
35 Remote control status in an IP connection
Chapter 7 Output and Screen Display — Screen status display
– 169 –