Panasonic AJ-UPX360ED Operating Instructions Manual page 90

Chapter 4 Operation — Menu settings
[BATTERY REMAIN]
Displays/hides the power status.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[REC FORMAT]
Displays/hides the recording format settings.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[FRAME RATE]
Displays/hides the settings in the [SCENE FILE] menu → [FRAME RATE].
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[CLIP NAME]
Displays/hides the clip file name to be recorded. Up to eight characters from the beginning of the file name are displayed.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[REC REMOTE]
Displays/hides the control status of the recording start and recording stop on the external equipment connected to the <SDI OUT> terminal and the
<HDMI> terminal.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[REC MODE]
Displays/hides the status of the interval recording.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[FBC]
Toggles whether to display when the flash band compensation function is activated.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[HDR/DRS/V-Log]
Toggles whether to display when the high dynamic range recording function, dynamic range stretcher function, or V-Log recording function is enabled.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[O.I.S.]
Toggles whether to display when the optical image stabilizer function is enabled.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[SCENE FILE]
Displays/hides scene file name.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
@
NOTE
t The setting is fixed to [OFF] when the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log].
[AREA]
Toggles whether to display when the area mode function or auto focus area width adjustment function is enabled.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
– 90 –