Table of Contents
Advertisement
Using the AC adaptor
Attaching the AC adaptor
Use the supplied AC adaptor. Do not use an AC adaptor for other device.
The supplied AC cable is dedicated for this camera. Do not use with any other device. Also, do not use AC cable from other device on this camera.
1
Connect the AC cable to the AC adaptor. (Fig. 1)
f Insert the AC cable all the way in until it stops.
2
Connect the power plug to the power outlet. (Fig. 1)
3
Connect the AC adaptor to the <DC IN 12V> terminal. (Fig. 2)
f When removing the AC adaptor, always set the power switch to < h > (standby), and check that the LCD monitor is turned off before removing.
@
NOTE
t To record with the AC adaptor connected, mount the battery in case there is a power outage or disconnection of the power outlet.
t The power is consumed even when the power switch is set to < h > (standby). To prevent power consumption, disconnect the AC adaptor from the
power outlet when it is not used for a long period of time.
t The battery charger and the AC adaptor is designed to operate regardless of the country or region in use. This operates with power supply voltage of
100 V-240 V, and power supply frequency of 50 Hz or 60 Hz. However, the shape of the power outlet differs depending on the country or the region.
Prepare a plug that fits the shape of the power outlet. Consult the dealer for conversion plug.
Chapter 3 Preparation — Power supply
To the power outlet
Fig. 1
– 33 –
Fig. 2
Advertisement
Table of Contents
