Panasonic AJ-UPX360ED Operating Instructions Manual page 173

FUNCTION screen
Displays the video output settings and information of the recording media.
[VIDEO OUT]
[HDR/SDR]
(When the [SYSTEM] menu →
[COLOR SETTING] is set to
[NORMAL])
[V-Log/709]
(When the [SYSTEM] menu →
[COLOR SETTING] is set to [V‑Log])
[CARD STATUS]
AUDIO screen
Displays the audio input/output settings and the audio level meter.
Chapter 7 Output and Screen Display — Screen status display
Item
[VIDEO OUT SEL]
[SDI OUT FORMAT]/[AV OUT
FORMAT]
[SDI OUT CHAR]/[AV OUT CHAR]
[HDMI OUT FORMAT]
[HDMI OUT CHAR]
[SDI OUT]/[AV OUT]
[HDMI OUT]
[LCD/VF]
[SDI OUT]/[AV OUT]
[HDMI OUT]
[LCD/VF]
—
[TOTAL]
[SLOT1]
[SLOT2]
Displays the output destination of the video and audio with [SDI + HDMI]/[AV +
HDMI].
Displays as follows depending on the setting for the output destination of video
and audio.
f When set to [SDI + HDMI]:
The signal output from the <SDI OUT> terminal is displayed with
[1920×1080p][1920×1080i]/[1920×1080PsF]/[1280×720p]/[720×480i]/
[720×576i].
f When set to [AV + HDMI]:
The signal output from the <AV OUT> terminal is displayed with [720×480i]/
[720×576i].
Displays as follows depending on the setting for the output destination of video
and audio.
f When set to [SDI + HDMI]:
Displays whether to superimpose the character to the output from the <SDI
OUT> terminal with [ON]/[OFF].
f When set to [AV + HDMI]:
Displays whether to superimpose the character to the output from the <AV
OUT> terminal with [ON]/[OFF].
The signal output from the <HDMI> terminal is displayed with [3840×2160p]/
[3840×2160p(420/8bit)]/[1920×1080p]/[1920×1080i]/[1280×720p]/[720×480p]/
[720×576p].
Displays whether to superimpose the character to the output from the <HDMI>
terminal with [ON]/[OFF].
Displays as follows depending on the setting for the output destination of video
and audio.
f When set to [SDI + HDMI]:
The output image from the <SDI OUT> terminal is displayed with [HDR]/
[SDR].
f When set to [AV + HDMI]:
The output image from the <AV OUT> terminal is displayed with [SDR].
The output image from the <HDMI> terminal is displayed with [HDR]/[SDR].
Displays the output image from the LCD monitor and the viewfinder with [HDR]/
[SDR].
Displays as follows depending on the setting for the output destination of video
and audio.
f When set to [SDI + HDMI]:
The output image from the <SDI OUT> terminal is displayed with [V-Log]/
[V-709].
f When set to [AV + HDMI]:
The output image from the <AV OUT> terminal is displayed with [V-709].
The output image from the <HDMI> terminal is displayed with [V-Log]/[V-709].
Displays the output image from the LCD monitor and the viewfinder with
[V-Log]/[V-709].
Displays the status, remaining recording capacity, and the total capacity of the
memory card inserted in the card slot.
It is not displayed when set to the [NETWORK] menu → [NETWORK FUNC] →
[NDI|HX].
The status of the memory card that is displayed are following types.
f [NO CARD]: Memory card is not inserted.
f [UNSUPPORTED]: Memory card is not supported.
f [FORMAT ERROR]: Memory card cannot be used. (Format error)
f [PROTECTED]: It is write protected. (The write-protection switch of the
memory card is set to the LOCK side)
f [NO REMAIN]: There is no remaining recording capacity.
f [NOT SDXC]: SDXC memory card is not inserted in the MOV recording.
f Cases other than above: The remaining recording capacity is displayed in 0%
through 100%.
Displays the remaining recording capacity/total capacity of the memory cards in
the card slot 1 and the card slot 2.
Displays the status and remaining recording capacity/total capacity of the
memory card in card slot 1.
Displays the status and remaining recording capacity/total capacity of the
memory card in card slot 2.
– 173 –
Description