Treadmill - Vision Fitness T9250 Owner's Manual

TROUBLESHOOTING YOUR TREADMILL
Our Treadmills are designed to be reliable and easy to use. If, however, you have
a problem, these troubleshooting steps may indicate the cause.
PROBLEM: The Console does not light up.
SOLUTION: Check to make sure the Treadmill is connected to a functioning outlet,
and that the Treadmill is turned on.
PROBLEM: The Treadmill's built-in circuit breaker trips repeatedly, shutting-off for
no apparent reason.
SOLUTION: The lubricating wax coating on the deck is wearing down and needs to
be replenished; contact your VISION FITNESS retailer.
PROBLEM: The Treadmill shuts off when elevated.
SOLUTION: Check to make sure that the power cord is not stretched so tight that
when the Treadmill is elevated the cord is pulled out of the wall outlet.
PROBLEM: The running belt does not stay in the center of the Treadmill when you
are running on it.
SOLUTION: 1) Check to make sure the Treadmill is level. 2) The running belt is
loose and needs to be properly tensioned (see Page 46 for proper procedure).
PROBLEM: The belt moves within 1/4" of — but does not touch — the side rail.
SOLUTION: There is nothing wrong, this is normal and will not cause any damage.
NOTE: If the above steps do not remedy the problem, discontinue use, turn the
power off and contact your VISION FITNESS retailer.
6 4