Auto-Calibration T9250 - Vision Fitness T9250 Owner's Manual

USER ENGINEERING MODE T9250
(continued)
ACCUMULATED DISTANCE
P10 represents accumulated distance, either in miles or kilometers. This informa-
tion is for viewing only; the data can not be modified.
PAUSE TIME
P14 represents the pause time. The default pause time is 5 minutes. You can modify
the pause time from 20 seconds to 10 minutes. You can modify this time by using
the SPEED or ELEVATION arrows. Press and hold SELECT to save the new value.
DEFAULT TIME
P15 represents the program default time. You can modify this time by using the
SPEED or ELEVATION arrows. Press and hold SELECT to save the new value.
EXIT USER ENGINEERING MODE
P17 represents exit mode. When you press SELECT to select the function, the
console performs a reboot, returning to the startup screen.
AUTO-CALIBRATION MODE T9250
DO NOT STAND ON THE BELT WHEN PERFORMING THE AUTO CALIBRATION
AUTO appears in the data window for the auto-calibration function. To begin auto-
calibration, press START. The Treadmill will run through minimum and maximum
speed and elevation. The auto-calibration will take 3-5 minutes. When auto-cali-
bration is complete "End" will appear in the data window. The Treadmill will reboot
and return to the startup screen.
6 3