Power & Safety Key - Vision Fitness T9250 Owner's Manual

POWER
Ensure that your Treadmill is properly
connected to a power outlet, then turn
on the Power switch, located at the front
of the main frame.
SAFETY KEY CLIP & TETHER
Your VISION FITNESS Treadmill will not
start unless the Safety Key is inserted
into the keyhole in the center of the con-
sole case. You should attach the clip end
to your clothing. If at any time you need
to stop the Treadmill quickly simply pull
the Safety Key off the console. This will
cut all power to the Treadmill and it will
come to a complete stop. To resume
your workout, place the Safety Key back
in place. This will send you back to the
start-up mode.
9